Factory-direct refractory anchors from India's largest manufacturer. SS304, SS310, Inconel — SEPL-01 to SEPL-30. Supplying to Saudi Refractory Industries Co, Al-Khobar and EPC contractors across the Kingdom since 2005.
Santura Engineering is a verified supplier of refractory anchors to Saudi Refractory Industries Co, one of the Kingdom's established refractory material companies based in Al-Khobar, Eastern Province.
Santura Engineering supplies refractory anchors to CEMEX, one of the world's largest building materials companies. Our anchors are installed in CEMEX cement plants across multiple countries.
Santura Engineering's largest single supply of refractory anchors was for the insulation of 5 heaters in the KNPC Grassroot Refinery Project, Kuwait in 2016. We export to India, Spain, Italy, Kuwait, UAE, Bahrain, Saudi Arabia, Thailand, Mexico, and 25+ countries worldwide.
Santura manufactures 30+ anchor types covering all four lining categories: brick, concrete (castable), double, and ceramic fiber. Every type is available in SS304, SS310, and Inconel grades. Hot rolled or bright 2B finish. Solution annealed as standard.
| Code | Type | Lining Category | Section | Details |
|---|---|---|---|---|
| SEPL-01 | Brick Staples | Brick | Round | View → |
| SEPL-02 | Brick Support Consoles | Brick | Flat | View → |
| SEPL-03 | Brick Claws | Brick | Flat | View → |
| SEPL-04 | Scissor Clips | Brick | Flat | View → |
| SEPL-05 | Tie Back Anchors | Brick | Round | View → |
| SEPL-06 | Split Y | Castable | Flat | View → |
| SEPL-07 | V Anchors | Castable | Round | View → |
| SEPL-08 | Bullhorn Anchors | Castable | Round | View → |
| SEPL-09 | Corrugated H Anchors | Castable | Flat | View → |
| SEPL-10 | Y Refractory Anchors (Flat) | Castable | Flat | View → |
| SEPL-11 | Flat Sectioned Anchors | Castable | Flat | View → |
| SEPL-13 | Corrugated V Round | Castable | Round | View → |
| SEPL-14 | Multipurpose Anchors | Castable | Various | View → |
| SEPL-15 | Movable Anchors | Castable | Round | View → |
| SEPL-16 | Shear Connectors | Castable | Round | View → |
| SEPL-17 | Round Y Anchors | Castable | Round | View → |
| SEPL-18 | Strip Corrugated | Castable | Flat | View → |
| SEPL-20 | Dual Pin Anchors | Double Lining | Round | View → |
| SEPL-21 | V Anchor with Nut | Double Lining | Round | View → |
| SEPL-22 | Screw-on Anchor | Double Lining | Round | View → |
| SEPL-23 | Slit Stud Anchors | Double Lining | Round | View → |
| SEPL-24 | Fiber Stud Anchors | Ceramic Fiber | Round | View → |
| SEPL-25 | Threaded Studs | Ceramic Fiber | Round | View → |
| SEPL-27 | Melt Extract Needles | Fibre | Round | View → |
| SEPL-28–30 | Cold Drawn Needles (Straight/Hooked/Wavy) | Fibre | Round | View → |
All anchors manufactured from certified wire rods. Densities per ASTM material specifications. Santura maintains ready stock of SS 300 series and Inconel wire rod coils for fast turnaround.
| Grade | UNS / Werkstoff | Density | Max Temp | Stock |
|---|---|---|---|---|
| SS 304 | S30400 / 1.4301 | 7.93 g/cm³ | 870°C | Ready Stock |
| SS 309 | S30900 / 1.4833 | 7.98 g/cm³ | 980°C | Ready Stock |
| SS 310 / 310S | S31000 / 1.4845 | 7.98 g/cm³ | 1150°C | Ready Stock |
| SS 316 | S31600 / 1.4401 | 7.98 g/cm³ | 870°C | Ready Stock |
| SS 321 | S32100 / 1.4541 | 7.92 g/cm³ | 870°C | On Order |
| 253MA | S30815 / 1.4835 | 7.80 g/cm³ | 1150°C | On Order |
| Inconel 600 | N06600 / 2.4816 | 8.47 g/cm³ | 1175°C | Ready Stock |
| Inconel 601 | N06601 / 2.4851 | 8.11 g/cm³ | 1250°C | On Order |
| Incoloy 800H | N08810 / 1.4876 | 7.94 g/cm³ | 1100°C | On Order |
Fired heaters, steam reformers, FCC units, sulfur recovery units, ethylene crackers, crude distillation heaters. Supply to EPC contractors working on Aramco and SABIC projects in Jubail, Yanbu, and Rabigh.
Rotary kilns, preheaters, calciners, coolers, cyclones. Santura supplies to CEMEX cement operations globally — Croatia, Spain, Czech Republic. Anchors designed for thermal cycling in kiln environments.
Blast furnaces, electric arc furnaces, ladles, reheating furnaces, aluminium smelter pot linings. High-nickel alloy anchors for extreme operating conditions in Saudi steel mills.
CFBC boilers, HRSG units, desalination plant heat exchangers, waste heat recovery systems. Anchors for thermal cycling resistance in Saudi power generation facilities.
All refractory anchors conform to ASTM A240, A276, A484, B166, B168, and DIN 17440 standards. Each consignment includes full documentation as required by Saudi industrial operators.
Saudi Arabia is one of the world's largest markets for refractory materials, driven by its massive petrochemical industry, expanding steel sector, and ambitious Vision 2030 infrastructure programme. Santura Engineering Pvt. Ltd. has been supplying refractory anchors to the Kingdom since 2005, delivering to established clients including Saudi Refractory Industries Co in Al-Khobar and EPC contractors working across Jubail, Yanbu, Dammam, and Riyadh.
Santura Engineering was founded in 1984 in Mumbai, India by Mr. Bharat Diwan, a production engineer. The company has been manufacturing stainless steel and Inconel refractory anchors since 2005. Our factory is located at BPT Plot No. 200, 201, Quay Street, Darukhana, Reay Road, Mumbai 400010, near India's largest container port (JNPT / Nhava Sheva), providing direct and fast shipping access to all Saudi ports.
With good stock capacities of SS 300 series and Inconel wire rod coils, Santura Engineering delivers large quantities of refractory anchors at the fastest possible time and at competitive factory-direct prices. Our annual production capacity exceeds 5 million anchor units, enabling us to fulfil orders from a few hundred pieces to over 100,000 pieces per consignment.
Santura Engineering's refractory anchors are installed in critical industrial facilities worldwide. Our clients include CEMEX — one of the world's largest building materials companies — for whom we supply refractory anchors for cement plant operations in Croatia (kiln overhaul programme across 2024, 2025, and 2026), Spain (Planta de Alcanar), and Czech Republic. Our largest single supply was for the insulation of 5 heaters in the KNPC Grassroot Refinery Project in Kuwait, 2016.
Our refractory anchors have been exported to oil and gas, cement, iron and steel, fertiliser, and refinery sector EPC contractors in India, Spain, Italy, Kuwait, UAE, Bahrain, Saudi Arabia, Thailand, Mexico, and 25+ countries worldwide.
Santura manufactures over 30 types of refractory anchors under the SEPL product series. For brick linings: brick staples (SEPL-01), brick support consoles (SEPL-02), brick claws (SEPL-03), scissor clips (SEPL-04), and tie-back anchors (SEPL-05). For castable and gunning linings: split Y (SEPL-06), V anchors (SEPL-07), bullhorn anchors (SEPL-08), corrugated H (SEPL-09), Y flat (SEPL-10), flat sectioned (SEPL-11), corrugated V round (SEPL-13), multipurpose (SEPL-14), movable (SEPL-15), shear connectors (SEPL-16), round Y (SEPL-17), and strip corrugated (SEPL-18). For double linings: dual pin (SEPL-20), V with nut (SEPL-21), screw-on (SEPL-22), and slit stud (SEPL-23). For ceramic fibre linings: fibre stud anchors (SEPL-24) and threaded studs (SEPL-25). Plus washers and reinforcement stainless steel fibres (SEPL-27 to SEPL-30).
All anchors are manufactured in SS304, SS310, SS316, SS316L, Inconel 600, and Inconel 601 grades. Anchors are available in hot rolled or bright 2B finish and are solution annealed as standard. Every order ships with EN 10204 3.1 mill test certificates, certificates of conformity, spectroscopy test results, and complete heat number traceability documentation.
Email: enquiries@santura-eng.com
WhatsApp: +91 9833 222 326 (Nikhil Diwan)
Phone: +91 9930 968 116 (Shravan Diwan)
Address: BPT Plot No 200, 201, Quay Street, Darukhana, Reay Road, Mumbai 400010, India
IEC: 0309068151